首先拆卸完旧的爱克赛蓄电池后，接下来就安装新的爱克赛 蓄电池，安装时要先清理爱克赛 蓄电池的隔热体，然后把爱克赛 蓄电池安装到蓄电池托架上或者蓄电池槽里，在装上蓄电池压紧器，并用夹持器螺柱禁锢爱克赛 蓄电池。其次，整个旧爱克赛 蓄电池的拆卸，先依次拆卸负极接线、正极接线以及挡泥板对角斜支撑臂，接下来再拆卸爱克赛 蓄电池压紧夹持器螺栓，将蓄电池拆卸下来，同时拆卸爱克赛 蓄电池隔热体。最后，要把蓄电池的负极接线和正极接线连接到蓄电池上，然后紧固接线端子螺栓，在将挡泥板对角斜支撑臂装好。
爱克赛 蓄电池在安装时要遵循一定的操作手法顺序，使用一段时间后的爱克赛 蓄电池要更换了，在更换的时候，更应按照操作顺序来进行。
用
First remove the old Axel battery, then install the new Axel battery. During the installation, first clean the insulation of the axel battery, then install the axel battery on the battery bracket or battery slot, install the battery compressor, and use the clamp stud to imprison the axel battery. Secondly, for the removal of the whole old Axel battery, first remove the negative wire, positive wire and the diagonal support arm of the fender, then remove the axel battery compression retainer bolt, remove the battery, and remove the axel battery insulator. Finally, connect the negative and positive connections of the battery to the battery, then tighten the terminal bolts and install the diagonal support arm of the fender.
The installation of Axel battery should follow a certain sequence of operation methods. After a period of use, the axel battery should be replaced. When replacing, the operation sequence should be followed.
use
